SITECH RACING billet upper gearbox mount
On the standatd mount fitted to the 2.5l 5 cylinder engine, it has a tapped hole to bolt into for hanging the gearbox from, with time and use the aliminium thread wears to the point the box will fall onto the drivesafts and subframe causing quite a bit of damage. So we have come up with a stronger and lighter mount to replace the standard one with. Our mount also has heavy duty stainless insert to accept the bolt that suspends the gearbox, so no wear and no cross threading.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: